MAZIC® Claro CAD (5pc x mandrel-type/Cerec-type blocks)

MAZIC® Claro CAD

Lithium Disilicate Glass Ceramic for CAD/CAM (mandrel-type/Cerec-type blocks)

Variety of Shade · High Flexural Strength · Excellent Fracture Strength · Excellent Esthetics

Excellent esthetics and durability!

MAZIC® Claro CAD is a high-strength glass ceramic block by Lithium Disilicate for CAD/CAM process. Applications are single restoration unit such as Inlays, Onlays, Veneers and Crowns. It is possible to produce Full contour, Cut-back and Coping in case of Crown application due to various shades as well as 3 types of transparency. Also, you can take the advantage of natural tooth-like esthetics with processing of Staining, Glazing and Build-up.

MAZIC® Claro CAD provides you with high flexural strength around 450MPa and also you can save processing time and bur consumption through excellent accuracy as well as efficiency in working. There is no much considerable variation on shades and transparency after many times of sintering.

In this regard, MAZIC® Claro CAD is much more stable than other blocks of Lithium Disilicate reinforced by zirconia while using.

TRANSLUCENCY & SHADES

FEATURES & BENEFITS

• Biocompatible
• 1-day treatment
• High flexural strength and vickers hardness
• Save working time by excellent process optimization
• Wide applications of Inlays, Onlays, Veneers and Crowns
• Natural tooth-like esthetics with various shades and transparency

PHYSICAL PROPERTIES

Physical Properties – Comparison with Other Materials

• MAZIC® Claro CAD shows outstanding flexural strength and fracture toughness more than glass ceramic in feldspar series and indirect resin. Also, esthetics by MAZIC® Claro CAD is the most similar to natural teeth. You can achieve the best esthetic prosthesis by using MAZIC® Claro CAD.

Flexural Strength

• High flexural strength makes possible to use the material for a long time in oral.

Wear Resistance

• High wear resistance makes long-term use due to the high resistance to chewing and surface wear by food or toothpaste.

Vickers Hardness

• High vickers hardness increases resistance to micro-wear.

Fracture Toughness

• High fracture toughness decreases possibility of fracture by shock and others.

Fast Processability

• Comparison of Processability:
  • Sophisticated and refined results compared to other materials.

Comparison of Fluorescence

• Suitable for esthetic prosthesis by natural tooth-like fluorescence of MAZIC® Claro CAD compared to zirconia.

INDICATION

MAZIC® Claro CAD has the applications in single restoration unit such as:

• Inlays
• Onlays
• Veneers
• Full crowns
• Implant Crowns

PREPARATION GUIDELINES

• MAZIC® Claro CAD follows a prep-guideline of all ceramics restoration.
• Inside of the edge and angle should be round.
• It is recommendable to prep rounded shoulder and chamfer.
• The numerical values in guide-lines are the minimum thickness of prosthesis by MAZIC® Claro CAD.
• ✔ DO'S:
  • In case of crown, prep tooth with 5~6˚ taper, rounded edges and shoulder margin.
  • Remove residues(temporary cement, tooth-debris and scanning spray) by a brush or soft pumice.
  • Gently clean with water and blow dry by air. (Do not dry completely)
• ❌ DON'TS:
  • Do not use chemicals after prep. (Example : EDTA, CHX, Bicarbonate, Hydrogen peroxide, Hyper-esthetic agent)
  • Do not use laser etching.
  • Do not use temporary cement in types of eugenol affiliation.

CEMENTATION GUIDELINES

1. Intraoral Try-in

If necessary, adjust the surface with a diamond bur.

2. Etching

Etch inside of prosthesis with 5% of Hydrofluoric acid for 20 sec. and clean by neutralizing agent.

3. Silanate

Before cementation, apply silane primer and dry for 60 sec.

4. Cementation

Apply high performance self-adhesive or adhesive resin cements.

5. Final Restoration

Hold restorations in place until cement sets. And remove excess cement.

MAZIC® Claro CAD Crystallization Schedule

PACKAGING

• 5 x mandrel-type/Cerec-type, Lithium Disilicate Glass Ceramic blocks (WxLxH: 14.5 x 12.4 x 18 mm)

APPLICATION

• Recommended for use with ARUM Milling Machines

CLINICAL CASES

MANUFACTURER

VERICOM (KOREA)

"Making the World Smile"

VERICOM, since its establishing 1998, has quality first principles as the key to management. Since old times, teeth have been said to be one of the most important things in our body. So, the quality of dental materials is the most important when considering the role and function of teeth.

Vericom was founded by researchers with experience and technology accumulated from the research of photopolymers and composite resin materials in large laboratory. With more than 10% of total sales invested in research and development, R&D plays a leading role among domestic dental material companies and releases the first new products in Korea every year.

Currently, it has developed into a global company that provides innovative products in various fields to dentists and dental technicians. More than 60 products are currently in production, from the world's second developed digital material "MAZIC Duro" in 2015 to recently produced 3D materials, and we have obtained over 10 overseas certifications such as CE, FDA, etc.

Starting with the $10 million export tower in 2018, the product is being used in more than 100 countries. We are operating a local corporation in the United States, and we are trying to grow into the number one company in Asia and the Pacific.

We want to be remembered for a long time as a company that enables communication with humanity in the world and is needed for a healthy society with a smile like Vericom's management philosophy of “Making the World Smile”. All of Vericom's employees will make efforts to become a company that is always the best in quality and faithful to the basics.

DENTAL ADHESIVE MATERIALS

CAD/CAM MILLING MATERIALS

3D PRINTING MATERIALS